Smok Vaporizer Coils-5pcs pack

New Smok Vaporizer Coils-5pcs pack
  •          T8 Coils Specifications:
  •          Resistance: 0.15 ohm
  •          Recommended Wattage: 50W-110W (Best at 60W-80W)
  •          Patented octuple coil
  •          Stainless steel
  •          Clapton kanthal wire
  •          Organic cotton·     
  •         SMOK TFV8 COMPATIBILITY
  •          Smok Alien Coils
  •          SMOK TFV8 Baby Coils
  •          Smok Brit Beast Replacement Coils

 

These are Smok's most popular 0.4 Ohm TFV8 coils designed for all-day vaping with excellent flavour combined with huge clouds but designed to be relatively economical with your juice. The TFV8 is the coil that comes with SMOK TFV8 Baby tanks and is compatible with the top of the range SMOK Alien 220 Watts mod and the Brit Beast Tank.

The TFV8 awesome coil-head has elongated wicking ports and a conical body to concentrate e liquid flavour as it is drawn into the chimney. This capable all-rounder also chucks a very impressive cloud. The TFV8 Baby coil vapes best between 55 and 65 Watts. For maximum limits you can take it up to 80 Watts but start low and look for your personal sweet spot!

The 22mm TFV8 Smok Alien tank is leader in its class. 

 

 

TFV8 Instructions: Replacing Coils

 

Hold the tank upside down

Unscrew and remove the tank base,

The Coil Unit is located in the centre of the tank base

Unscrew and replace the coil with a fresh atomiser head

Finger Tighten plus a slight additional turn so that the coil is FIRMLY in place

Replace the tank base taking care not to over tighten

To avoid damage to the wick in the atomiser head always make sure you prime your coils by adding few drops of e liquid to the TFV8 and waiting a minute or two prior to vaping.

 

 

 

LEAK PROOFING - LEAK FREE VAPING

Your device is manufactured with precision so will not leak providing you use the product and parts correctly. Where any leaks have occurred, we have solved almost all by taking the following steps.

 

When using the tank for the first time ensure all the parts of your tank are tightened properly, this involves finger tightening then an extra 1/16th turn

Ensure the O-ring seals are correctly in place on your Smok Alien

Make sure the coil in the tank is finger tightening then an extra 1/16th turn

When cleaning or replacing the coil carry out the above procedures.

Ensure you have the correct temperature/power settings for your particular device. Coils for example have ratings and should be kept within maximum and minimum recommended settings. Too high and your device will pop and crackle which may cause spots of e liquid to escape via the air-intake.

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 512
  • Product Code: pro-09876
  • Availability: In Stock
0 Product(s) Sold
  • ₦9,000.00
  • Ex Tax: ₦9,000.00